Lego Moc - Blog Posts

made this guy, idk really know what to call it. it's silly

Some mocs i made over break

APMK-D blacktron unit

The All Purpose but Mostly Killing droid is a terrifying blacktron unit that operates at high speeds. They are extremely expensive to build and use but extremely effective so they are saved for pivotal battles

Nitrose

Experimental hero model. Dont have a ton of lore for this one

Spyboxes!

my siblings and I used to build these guys and hide them around the house and sometimes in other places like an elf on the shelf except they were superspies

they didn't have mechs before but i wanted to make one

decided to make the second phase of infection because I'm avoiding my work

The Rot Husk is the result of the Rot Worm's infection. To keep itself from rotting, the Rot Husk must eat. It will violently attack anyone and anything it comes across, usually with very little regard for its personal safety. It's not long before large growths begin to grow on the creature acting much like tumors. The tumors steal the nutrients from the Rot Husk making it even more hungry and desperate. eventually, the growths overtake the Husk entirely, becoming a pile of pulsating jelly. These growths will hatch into new Rot Worms that will fight and kill each other as soon as they hatch leaving only one to go on to find a host. The Rot Worms parasitic lifecycle is short lasting only a few months.

A (mostly accurate) recreation of the J7W1.

Custom Build #2, Ka-Ri amphibious heavy tank.

Custom Build, D5K1 "Shōwakusei" (i probably butchered that. I think it means "Asteroid.") Carrier-based dive bomber as an improvement on the D4Y2, with a few reference images. (Not an actual design irl)

here's inlaid library with imelda!!! rlly proud of the minifig arms in the lionhead :>

my cheat this time was the modified brick in the to-scale floor chicken. also imagine the other fig has the series 10 medusa printing its not in stud.io

turns out stud.io doesn't really have all too many photoreal rendering options?? (might be missing something) so have the dark ass render run thru photo filter again

also the models can connect using technic pins!!! excited to see em all lined up :3

tried out stud.io for the first time today and made mad forest from vampire survivors!!!! more levels to come maybe :>

not suuuper pleased with the high shininess/low saturation of the default renderer, will probably poke it more next time

and if anyone has parts suggestions lmk!! trying to stay to real parts as best i can (tho that black heart tile was just too good)

a South Dakota class heavy frigate. This specific ship is called the USS Rapid City, the captain is named Elijah Mons Wingate

i made a Lego turret inspired by the sentry turrets from helldivers 2.

I tried to recreate the super earth logo but it looks a little goofy. :)

I have made a fictional halo unsc frigate out of legos called “Last Call”. Also the crew of the ship often call it big bass due to its goofy fish proportions. I’m not a super big halo fan but I think halo is really cool and I wanted to make something about it. :)

I got a Brickvault halo Falcon

It is a cool build and I like it. :)

a Lego drone tank

Inspired by the COD black ops 3 drone tanks

a Lego Drone I built

I kind of based it off of the wasp drone drone cod aw

a Lego drone I made

It’s called the U-21 sparrow hawk

I was bored so I made a custom Lego scp mtf miniature :)

I got the Lego vest thingie from bricks and minifigs.

i made a lego minecraft moc 18x 20 studs :3

i tried my best taking pictures but im not excactly the best ehe -w-

but yeh every since i began watching the cheesey studios minecraft vids its been like the only thing ive built with legos lol , iss super fun :3

So, uhm. I wanted to post something a bit different here today. Behold a short thing I did a while ago (I'm actually posting it because I found it while cleaning some files). I'll admit, the quality of both the image and whatever I was trying to tell is pretty low. But I think overall, it's still surprisingly decent, for what it's supposed to be.

I did a lot of these some time ago, but it's terribly time-consuming, so I've had to stop. Hopefully, next break, I'll have the occasion to do these again (now with better image quality, and even proper MOCs to use). I miss doing stop-motion a lot-

I sadly don't have much of that project left (images, bits of the background...), though strangely enough, I still have some of the characters. Though I know why the lighting is so bad : at that point, I only had a set of blue lights, which caused this blue filter all over it (it looked really nice, though. Without any camera...)

I won't point out all of the weird details, but I am still quite proud of that odd use of a hair piece as a broom. Some pieces certainly have some unexpected uses.

✨Tree ! ✨

So I found another technic. And it makes for great (albeit round) trees.

Anyway, some rambling about that below.

Another angle. It's not needed; but oh well.

It's very simple, I'll admit that. Then again, I don't do purely organic MOCs very often, the last one was probably my Camp Site, and it wasn't the main focus at the time, but I'm trying.

Anyway, if you actually decided to read that, you're probably seeking whatever technic I used to make that, not the random rambling. So here it is :

To sum it up : core piece is a modified 1x1 brick, surrounded on all sides by two flower stems (I've used the bar ones, the stud variants work too). Then flowers and leaves. To give some varied shapes, you can get some leaves upside down (cyan ones on the image), and you can also get rid of flowers by using a piece on the other side of the leaf (any piece works as long as it has a small bar connection), like the blue one on the right. Of course, same trick as before to give some shapes. It has some limitations, but I still think it's relatively good. If you like sphere, that it, hence why using a couple of them is better.

Also, I feel like, since I'm yapping about organic MOCs, I have to present my very first one :

That's ugly. But at least, you can technically tell it's a flower.

It's fragile and it's not interesting, though one funny thing is that, in order to keep it from collapsing under its own weight, I've had to add small iron bars (think unfolded paper clips) in the stem, which is actually really sturdy, while allowing for curvy shapes. Probably the only thing worth keeping from that thing.

Anyway, this whole tree thing was an accidental tangent from an actual, cool(?) MOC I was working on, which might actually be posted next week. Or maybe not, who knows really ?

Creature

✨Looks To The Moon✨ [1/2]

Where do I even start with that ? Oh, yeah. It’s not done just yet (if that wasn’t obvious enough).

Though, I won’t have the opportunity to work on it for a while, so I figured I might as well share the progress.

Obviously, I’m missing the water; and an outside — as well as a few other things I’ll mention somewhere below (along with closeups and way too many details, as always).

If you don’t care about any of that, you could still check up my silly little FP there !

Lots, lots of things to talk about here…

(Structure first, feel free to skip to the first actual close up if you consider that as boring.)

First of all, here is an edited version of the first pic, with water :

Looks much better already. And although it might prove complicated, I have a plan. Sort of. Because Lego has this really cool, transparent blue piece which they produced a lot of : folding garage doors. They’re everywhere on firefighter sets, and they’re really wide. With a few tricks, they might work.

As for the outside, well…I’m not there just yet. I’ll try to cover it up with some Iterator-esque pattern, I suppose.

I’m also missing a scug ! I absolutely want one, and given how I chose to represent the scene, it won’t be Saint nor Spears (shame). Rivulet is really tempting, but it might make too much blue; currently, my choice might be on Monk, to have sufficient contrast (and Monk is cute). Though I might change that, depending on how much small yellow pieces I have.

Now, before talking about the inside, let’s take a peek at the outside :

Here it is (back side, specifically). It’s a bit of mess because of the technics im using — which I’ll come to in just a seconds — but I also find it oddly fitting with the Iterators theme. The blacks on each sides are holding the cube together, and the technic bars in the middle are ensuring everything is held together — and also compensating for the weight of the top plate, kind of like how I did with my Carrion MOC a while back.

Anyway, the Technic™️.

The one thing which I find striking in Iterators cans is the tiling (14x14 from my last count), and it’s not that easy to replicate through Lego. Either you have no gap at all, and you use only the tiles’ grove as a separation (which, here, is way too small) or you make them very far apart, which looks terrible here). However, my tiling technic here is (not entirely mine) usually something you’d see to make floors, especially castels.

Here, I have three layers : the dark grey layer, which is the base; the light gray, which is the tiles; and, in between, I have a layer of black dots forming a grid diagonally to the first layer, on which the tiles are placed. This diagonality explains why, on the pic above, my plates have so much spiky edges, and which I have to use this whole complicated system to hold everything together.

Of course, it gets worse ! Because the cans are not perfect cubes, the edges are bevelled. And so I bevelled. Now, with all these intricacies, there was no way any regular connection would keep these edges in place. You can also spot what I used instead, which is an awful lot of ball and socket joints (mixel style). Incredibly useful, those pieces.

Anyway, enough boring structural details, here come the fun part !

Small things first, here is a comparison of the first vs final design for the neuron flies :

I’m really glad I actually managed to do that — they’re an important element, and the conception had me worried for a little bit.

The first design is, in my opinion, the best one can make at this scale. Slight issue : it’s not actually physically possible to make it hold together. After a lot of different iterations (ah !) I’m came up with the design on the right. It’s a bit more square, but it has a distinct head and floppy tails, which was all I was asking for. Obviously, the two tooth pieces I’m using are hardly held at all (using a mod 1x1 joint piece). There’s also, behind, a white dot with a hole, which ensures that these can be connected to the background via the long, transparent bars. Wasn’t easy to stick them without breaking them, and there’s no way I’m touching these now.

Her. She is the central piece of my MOC after all. It took me a while to figure out the design (mostly the head), but I’m glad of how it turned out. It’s not perfect, of course, but I feel like it works well, both scale-wise and color wise. And there’s only one (two) illegal connections, for the antennas which I’m making using hands. It’s very tempting to draw her a face — I’ll probably consider it, at some point.

The arm behind is also relatively good, with loose cables hanging from it. Once again, ball and socket joints are here to save the day; although I do feel like some parts of it are a little bulky, and it doesn’t drop down low enough…

Additional details, the piles of debris.

It’s…really difficult to make debris which don’t look purpose, and aren’t simply horrendous to look at. I tried to keep some grey tones, but also incorporated some brown, because it does actually bring some well needed contrast to the whole scene; and a few plants.

Speaking of plants, I’m no really liking these vines hanging from the ceiling (much thinner and darker in game), but as far as my expertise go, I dont see another way to get them here — and if there’s nothing at all, the whole piece suddenly gets really dull. Of course, there’s also the gap in the ceiling, with cables falling out; this, I will add more details to later on — and I have the hope to get a proper light source to go through it and act as a sun which will fall directly on my small LttM.

To conclude, here are final views of it, from further away, and with a brick separator from scale. It does look quite flimsy, doesn’t it ?

Oh, and, well. I’ve been messing with Dots recently. Figured this was worth including as a footer (probably on of the first achievements I unlocked — poor Moon~).

✨Smol Five Pebbles !✨

In a box, to be studied like a bug.

It’s a bit sketchy, but I really like the idea of small boxes diorama, so that you can just pile them up (this one is roughly the same size as this other thingy I made .

(You can also check up my Moon design, while you’re here !)

I tried to cram as much stuff as possible in there (an overseer, pearls, the entrance tubes…), which is quite the challenge in a 6x6x6 cube. I also added a small rail for the arm to 'slide' on. The technic itself is not exactly difficult, although, once more, brick-textured bricks are here to save the day. As it is the only 'illegal' connection of the whole build (who could believe it, coming from me, uh ?), I’ve also been refining it in StudIO to possibly make other Iterators~

Everything is held together through these four black brackets on the back, which makes working on it ridiculously simple : I can simply clip off a panel to modify it. (Also featuring my hand, for scale and because I still can’t take photos properly, it seems.)

Speaking of, since you made it all the way down here…I’m also working on another Rain World MOC, just a tiiiiny bit bigger. So here’s a sneak peek~

[edit] : here it is !

Hey I don't know if you saw my repost on your post but I would appreciate and would definitely built a brickheadz version of the boba fett prototype minifig that I have as my profile picture. Your post says feel free to request any more and I thought it was worth a shot even though I doubt he'd appeal to more people than me.

✨Boba Fett Prototype ! ✨

Hi ! This has been in my inbox for ages, I know. Finally had time to give it a try ! Had a lot of fun, actually, mandos have some really interesting shapes.

And, because it took me so long, I figured, I'd also give instructions, too. Some colours might not be available, though, but white should be pretty easy to find for the outside pieces.

Instructions can be found here !

Nice LEGO work! Glad to see MOCs are still shared by folks.

Thank you very much !

And as a proper answer, here is a little silly thing I made recently !

Still working on making it reliable, but’s a fun little project on the side of other things I have going on !

✨Snowman !✨

Couldn’t miss this year’s Christmas-themed MOC, of course ! Although it certainly is way less 'christmasy' than the previous ones (here and here) and more of a general winter decoration, it fits well.

There’s not a lot of technical work here, the spheres are classic designs which I tweaked a little, the arms are quite simple, the scarf has nothing complicated either; the only interesting bit might be the hat, because I used a really old technic piece — can’t find its id on bricklink… — with some other gears and such.

Anyway, merry Christmas to those who celebrate, and good day to everyone else !

Also, sorry for the terrible pic quality, I don’t have any proper set up; and I know I have a few things sitting in my inbox, I’ll get to it I swear.

✨Custom clones !✨

I really like messing around with minifigs, and I had recently got my hand on a 501st battle pack, which meant I had some spare accessories !

Of course, custom weapons, else it would be no fun, and of course of of them use illegal technic, because it's kind of my signature at that point. I really like how they all turned out - including the Dimension plates which are a really nice display base.

The most interesting piece it the small cloak piece I used on the sword one (Nexo Knight sword obviously !), because, first of all, it's blue, and it comes from some Marvel sets, which isn't a theme I manipulate often - which is a shame, there are some really cool pieces in there.

Also, these need names, but I did not find any yet...

✨The Kraken !✨

I’ve been messing around with water technics recently, and this was born. It certainly could be improved, but I like it like that.

There’s not much to mention about the build itself; except maybe the tentacles, which are only made out of the 1x1 round bricks, and nothing inside : they bend quite well and remain relatively sturdy when doing so.

As for the water technic I mentioned, the goal is to cover everything with tiles of one of two colours; and make a gradient underneath (see below). I also added some dark red into the mix to try and replicate the body of the thing underwater, with mitigated results.

✨Pride clones !✨

As I mentioned somewhere in my previous post (I think ?) I found my clones missing colours. So I did a rainbow Cody, and things went downhill from here.

There's not much to say about it built-wise that I haven't already said, but a few mentions of my colour palette might be interesting, notably some shade of 'rubber' materials, for a few of the purples. Also, there aren't nearly enough blue-green shades to satisfy my needs, but I can't do much about it.

You may also ask for other flags, who knows how they'll look...

Speaking of, the flags here have nothing to do with any headcannons or whatnot, they're purely aesthetic - or practical, since some colour subdivisions are easier to represent on some models than on others.

✨More Clones Brickheadz !✨

Since I acquired the Small Cody (40675), I found that there was an untapped mine. Why would they only make one ? Well. I don't have an answer to that, but I decided to take matters into my own one; so behold : 11 more. I went mostly for commanders here, but then I went a bit astray and so I added some captains to the mix.

In order, row by row :

Tukk (Not cannon but the colours are so beautiful)/Vaungh (died too soon-)/Rex (obviously)/Fordo (I did Rex, so I had to)

Gree/Doom/Thorn/Neyo

Bly/Cody/Fox/Wolffe

It was a really fun project, and I hope to do more of them in the future - maybe even phase 1s, some day~); supposedly not commanders because I did most of them (except Bacara, I know...The helmet was too tough).

And because I really like challenges, if you want to see another clone turned into one of these (Be it cannon or one of your ocs) feel free to send requests in my aksbox !)

Anyway this post is already far too long for anyone's dashboard, so closeups and details will be under the cut !

Let's start with the easy ones : Cody, Doom, Fox, Thorn

Obviously, Cody was easy, I just rebuilt the original one virtually - Nothing too hard. The printed pieces here are not the right ones, because Cody's are not available on STUDio yet, but the storm trooper ones were relatively similar, so I used these for most of these models. Of course, it means I'm lacking the sun bands, and a few other distinctive elements, but it works well enough for now.

Now, Doom is essentially a colour variation (minus a few antennas). I also used an old space piece, which has this big yellow arrow printed on it. I's not exactly what Doom has, but I feel like it's close enough for a first attempt.

Then, Fox is relatively similar to Doom, but with two DC-17s. I also moved the printed torso brick up to get that red line he has.

Thorn works in a similar way to Cody too, except I removed both accessories on the side of the helmet. I also added this tile with diagonal lines to figure the wings he has. One day I'll slap some real wings on there, but I haven't found the right image yet. I also gave him a Z-6, obviously. I really like it, so I might actually make that one physically, because the way it's build (with old binocular pieces) is pretty nice; although I doubt the pieces are available in black.

Moving on to two captains : Vaughn and Tukk !

Admittedly, not really that different either, except for one thing : I learnt to do custom prints now ! Yay ! Well, these are really basic : the blue line for Vaughn, and some trapezoids for Tukk's helmet (which are, indeed, not visible here - shame, I spent so long making these fit). The Ahsoka pattern was already in STUDio (because Ahsoka already has her own brickheadz, which I'll get my hands on someday~)

I must also add that having some cyan in this whole thing added some much needed colours in here, I'm grateful some people give their clones amazing colours (If somehow someone doesn't know who Tukk is, well just check High Ground Animation. Right now. It's really cool, trust me). Anyway.

As for design changes, I modified the faces slightly by adding 1x1 tiles, to allow for different colours variations on the face. It makes them look slightly blockier, but given the overall size of the head, it doesn't do much.

I also gave Vaughn a DC-15A. It's a bit messy, but it works out well enough. Past me forgot to render it, so here is a raw, in-software picture of it (from Fordo(s hand, but it's the same design for both) :

BARC helmets ? Wolffe, Fordo, Neyo

As I've been told, these look a bit wonky, and I'll admit its wasn't exactly easy, but in my defence, it's relatively hard to get such round shapes with bricks (lego cheated by adding the visor). Anyway, given that doing that with a printed piece was out of the question, I tried to replicate the filter's shape with actual bricks, and I used a printed piece which, technically, is Lando's moustache, but downward. I'd say it does the job relatively well.

I also added a rangefinder to Wolffe, which is a little big compared to everyone else's antennas, but It's still relatively to scale with the head itself. No custom prints for him (not sure where I would find the correct pattern images ?), but I've done it for Fordo and Neyo. Fordo obviously has his well deserved Jaig eyes (and who knew it would be that difficult to find a picture of that on internet ?), and Neyo has his symbol on the helmet, chest plate, and the shoulder not shown here.

The really tinkered ones : Gree, Bly, Rex :

Here, it was a matter of trials and errors to figure out just how to get the shapes right.

I actually started with Bly, by removing the previous visor and adding the macrobinoculars first, then I tried to shape the helmet around. Truth is, it doesn't make sense technically : the two separated parts of the helmet do not connected at all, if you remove the equipment. Luckily, no one has to know that.

Next is Gree. It took me some time to figure out how to properly get a round feel, but I feel like it's as good as I can make it like this. Colour-wise, it was surprisingly difficult to find how to balance the different shades of green, and equally hard was to figure out which silvery colour would render well in STUDio. The answer lied, as it always does, in Bionicle. Of course, none of these pieces exist in this colour, but it's not really my main problem (because none of the coloured printed pieces exist either).

Finally, Rex...He gave me some trouble, I have to admit. Firstly, the part-designing software decided to have some trouble with custom prints, which was problematic, because I simply couldn't do Rex without jaig eyes (and Fordo already had his). Then, I started with Gree's base and tried to go from there to fit Rex's custom helmet. I ended up using Boba Fett's printed visor piece for Rex, because these were all triangles. I also got rid of the printed chest piece and used some black plates to simulate the pouch he has; while also adding a a few more custom printed pieces for the arms and pauldron (barely visible, but they're here. I'm not entirely happy with it, but I don't see much other solutions than more and more custom prints, which isn't my goal, so it'll stay like that for now.

Anyway, that's way too much rambling for one post, so I'll just end by saying that next week I'll post an alt version of this whole build [here !], with some 'slight' colour alterations. Definitely nothing big.